About Us
Colleges & Institutes
Schemes
News & Press Releases
Tender / Procurement
DET 2012
Disclosure Norms
Centres of Excellence
Scheme and Budget
Important Links
 
 

Technical Education at Diploma Level
 
91. Micrometer inside with extension rods 25mm- 50mm Mitutoyo,Japan 6000.00 4%
  -do- -do- China 2650.00 4%
92. Vernier Caliper Digimatic 15 cm Mitutoyo,Japan 5500.00 4%
  Vernier Caliper 20 cm Mitutoyo,Japan ,P.No.532-120 2650.00 4%
  -do- 20 cm China 550.00 4%
93. Vernier height gauge 30 cm China 3050.00 4%
94. Vernier Bevel Protactor   Mitutoyo,Japan P.No.187-901 10500.00 4%
  -do-   China 2700.00 4%
95. Screw Pitch gauge   Mitutoyo,Japan 1200.00 4%
  -do-   China 450.00 4%
96. Wire gauge, metric STD Crystal 320.00 4%
97. Drill twist T/S H.S.S. set of 14 nos
6mm, 7.5mm, 9mm, 10.5mm, 16.5mm, 18mm, 19.5mm,
21mm, 22.5mm, 24mm, 25mm		 6mm to 25mm / 1.5 mm Adission/ I.T/J.K 10930.00 4%
98. Drill chuck with spandle 12mm Punjab 160.00 4%
  Drill Chuck with key 12 mm Halo 270.00 4%
99. Pipe wrench 40 cm R.S.I. 230.00 4%
  -do- 40 cm Taparia/ P.No. 1275 334.00 4%
100. Pipe Wrench 30 cm R.S.I. 130.00 4%
  -do- 30 cm Taparia P.No.1273 166.0000 4%
101 Pipe Vice No.4 Rahul 1430.00 4%
  -do- No.4 Punjab 1350.00 4%
102         77. Reamer Taper 4 mm to 9mm Set of 4 nos
103 Wheel dresser (One for 4 units)   No.4 90.00 78. Reamer parallel set of 5 nos 12mm- 16mm
104 Machine Vice 10 cm Rahul 950.00 79. Scraper Flat 15 cm
105 Machine Vice 15 cm Rahul 1450.00 80. Scraper 3 corner 15 cm
106 Sleeve drillmorse 0-1,1-2, 2-3 Bharat/Sagar 185.00 81. Scraper Half Round 15 cm
107 Vice bench (No.6) 12 cm Jaw Viney 1450.00 82. Chisel cold cross cut 9mmx6”
  -do- -do- Rahul (20 kg) 2194.00   Chisel cold diamond cut 9mmx6”
  -do- -do- Star   (26 kg) 2420.00 83. Chisel cold flat 19mm
108 Vice Leg (Heavy) 10 cm Jaw Punjab 2950.00   -do- 19mm
116. Fire Bucket STD Indian 185.00 84. Chisel cold round nose 9mmx6”
117. Machine Vice 15 cm Rahul 1450.00 85. Extractor stud Ezy out STD
118 Wing compass 30 cm Bharat/Sagar 120.00 86. Set Combination 30 cm
119 Hand hammer with handle 1 kg Steel 85.00   -do- 30 cm
TOOLS FOR ALLIE TRADE – BLACKSMITHY & SHEET METAL WORK
120 Hammer smith with handle 2 kg Steel 160.00   -do- 0.25cm China
121 Tongs round 12” Standard 70.00 88. Micro meter out side 25-50 mm Mitutoyo,Japan
122 Tong Flat 12” Standard 70.00   -do- 25-50 mm China
123 Smith S Square Heavy 60cm x 30 cm Punjab 120.00 89. Micro meter out side 0.25mm Mitutoyo,Japan
  -do-                 Light -do- Standard 90.00   -do- 0.25mm China
124 Cold Set rodded STD Standard 140.00 90. Micro Meter out side 50-75mm Mitutoyo,Japan
125 Hot Set rodded STD Standard 140.00   -do- 50-75mm China
126 Swages top & bottom 12mm pair Standard 240.00 91. Micrometer inside with extension rods 25mm- 50mm Mitutoyo,Japan
  -do- 19mm pair -do- 280.00   -do- -do- China
  -do- 25mm pair -do- 320.00 92. Vernier Caliper Digimatic 15 cm Mitutoyo,Japan
127 Swage Block (85 kg) 35cm x 35cm Standard 4250.00   Vernier Caliper 20 cm Mitutoyo,Japan P.No.532-120
128 Flatters (rodded) square 55 mm Standard 180.00   -do- 20 cm China
129 Fuller top & bottom (Pair) 6 mm Standard 110.00 93. Vernier height gauge 30 cm
  -do- 9 mm Standard 110.00 94. Vernier Bevel Protactor  
130 Anvil 50 kg Standard 2250.00   -do-    
131 Anvil Stand (75kg) 50kg Standard 3750.00 95. Screw Pitch gauge    
132 Shovel STD Standard 140.00   -do-    
133 Trammer STD Standard 140.00 96. Wire gauge, metric STD  
134 Rake STD Standard 140.00 97. Drill twist T/S H.S.S. set of 14 nos 6mm, 7.5mm, 9mm, 10.5mm, 16.5mm, 18mm, 19.5mm, 21mm, 22.5mm, 24mm, 25mm 6mm to 25mm / 1.5 mm  
135 Quenching tank N.Q.     98. Drill chuck with spandle 12mm  
136 Pocker STD Standard 140.00   Drill Chuck with key 12 mm  
137 Hardie STD Standard 130.00 99. Pipe wrench 40 cm  
138 Leather apron (Superior) STD Standard 120.00   -do- 40 cm  
  -do-       (Local) STD Standard 90.00 100. Pipe Wrench 30 cm  
139. Prick Punch   Bharat/Sagar 18.00   -do- 30 cm  
140. Mallet 1 ½’ Nylon 140.00 101 Pipe Vice No.4  
  -do- STD Wooden 45.00   -do- No.4  
141 Snips Straight 25 cm D/F 70.00 4%
142 Setting hammer with handle STD Indian 180.00 4%
143 Planishing hammer STD Indian 220.00 4%
144 Snip bent 25 cm Indian 180.00 4%
145. Stake hatchet STD Indian 450.00 4%
146 Stake grooving STD Indian 550.00 4%
147 Gauge imperial sheet STD Crystal 320.00 4%
GENERAL MACHINERY INSTALLATION
1. Anvil on stand 50kg Indian 6000.00 4%
2. Drilling machine pillar
sensitive with swivel table motorized with chuck & key		 0-20 mm Punjab 13500.00 12.5%
3. Drilling machine bench sensitive motorized with chuck and key 0-12 mm Punjab 7000.00 12.5%
4. Forge portable hand blower with stand 38 cm to 45 cm Punjab 5500.00 12.5%
5. Grinding machine (General purpose) D.E. pedestal
with 20 cm dia wheels rough and smooth with twist drill grinding attachment		 20 cm Priya 6300.00 12.5%
MODIFIED LIST OF TOOLS FOR THE 2ND YEAR FOR FITTER TRADE
1 . Gauge Slip as Johnson metric Set of 32nos Mitutoyo/Japan 24150.00 4%
  -do- Set of 87 nos -do- 62100.00 4%
  Gauge Slip as Johnson metric Set of 87 pcs China 8500.00 4%
  -do- Set of 83 pcs China 7000.00 4%
  -do- Set of 38 nos China 6300.00 4%
2 . Carbide wear block set 516-806-10 Mitutoyo/Japan 7400.00 4%
  -do- 516-802-10 -do- 7400.00 4%
  -do- 1-2mm INSIZE 2500.00 4%
3 . Gauge snap go and no go 25-50 mm by 5 mm Indian 5500.00 4%
4 . Gauge plug single 3 ended 5-55 mm by 1 mm INSIZE 21500.00 4%
5. Gauge Telescopic Series 155-905 Mitutoyo/Japan 6800.00 4%
  -do-   China 1750.00 4%
6. Dial Test Indicator 0-1 mm 513-517 T 7010S-10 Mitutoyo/ Japan   7400.00   4% 4%
  -do-   INSIZE 2450.00 4%
  -do-   China   4%
7. Sine Bar 125 mm Bharat/Sagar 2000.00 4%
8. Sine Bar 250 mm -do- 3600.00 4%
9. Lathe tools H.S.S. tipped set        
(a) Tool Bit H.S.S.(S100) 6mmx75mm Miranda/JK/IT 125.00 4%
(b) Tool Bit H.S.S.(S100) 8mmx75mm Miranda/JK/IT 165.00 4%
(c) Tool Bit H.S.S.(S100) 10mmx75mm Miranda/JK/IT 210.00 4%
10. Lathe Tool Bit 6mm x 75mm Miranda S-200 178.00 4%
11. Lathe Tool Bit 8mm x 75mm Miranda S-200 228.00 4%
12. Lathe Tool Bit 10 x 75mm MirandaS-200 296.00 4%
13. Arm Strong type Tool Bit Holder R.H. 3/8” Bharat/Sagar 255.00 4%
14. Arm strong type Tool Bit Holder L.H. 3/8” Bharat/Sagar 255.00 4%
15. Arm Strong Type Tool Bit Holder straight 3/8” -do- 220.00 4%
16. Stilson wrench 20 cm Taparia P.No.1171 110.00 4%
  -do- 20 cm Tolimax 80.00 4%
17. Spanner monkey up to 5 cm Solid 65.00 4%
  -do-   Taparia P.No.1225 165.00 4%
18. Pipe Cutter 6mm to 50mm Halo 675.00 4%
19. Pipe Face to grip pipe  upto 50 mm Rahul 684.00 4%
20. Pipe dies stock-complete set 6mm-12mm-19mm-25mm Pipe dies stock complete set 32mm-38mm-50mm 6mm to 50mm Takiar/Halo 2100.00 4%
21. Pipe bender spool type with stand manually operated ½” to 2” Orient 16600.00 4%
  -do- ½” to 3” Orient 21500.00 4%
22. Adjustable spanner 38cm long Toolimax/ Venus 320.00 4%
  -do- -do- Taparia P.No.1174 390.00 4%
23. Adjustable pipe chain tonge 22 cm long to take pipes from 3 cm to 63 cm 75mm Leader 570.00 4%
24. Dial Vernier Caliper universal type LCO 0.05 mm 0-200 mm Mitutoyo/ Japan 4750.00 4%
  Dial Vernier Caliper universal type 0.130mm LCO 0.05mm INSIZE 2050.00 4%
25. Screw thread micro meter with inter- changeable 0.4-1.75 mm
pitch anvils for checking metric threads 60.		   China (Aerospace) 4800.00 4%
26. Depth micrometer   0-100 mm Mitutoyo/Japan P.No.129-111 5200.00   4%  
  -do- 0-150 mm China 3800 4%
27. Vernier Caliper with tumb Block 0-130mm L.C.O. 0.2 mm 531-128 Mitutoyo,Japan 2750.00 4%
28. Comprator stand with dial indicator   China (Aerospace) 3500.00 4%
29. Engineer’s Square (knife-wedge) 150mm Bharat 320.00 4%
30. Surface roughness comparison plates “Ruberts” STD China (Aerospace) 6500.00 4%
 
 
Page of 4 of 6
« Back   Next »